RATTMMOTOR Upgrade Version 3018 PRO CNC Router Kit

After the machine is assembled, you can perform basic machine tests. The following is the recommended start-up sequence for the system:

1. Confirm that the USB cable of the control board is plugged into your computer, and then start the computer.
2. Start the software and verify in the status window that no errors are displayed. Under normal circumstances, when the control board is connected to the software, it will display "Idle." If a red error "Alarm" appears, you need to click the "Reset" of the software with the mouse, and then unlock to reach the "Idle" state.
3. Make sure that the 24V power supply is connected to the control board first, and then the other end is connected to 110-220V. Press the "on/off" button on the control panel.
4. Next, click the "Spindle" button to turn on the spindle motor. Move the slider left and right to verify whether the motor speed changes.
5. Adjust the value of "Feed" to the range of 200 to 500. Use the mouse to click the direction button on the left to confirm whether the X-axis and Y-axis are moving. In a similar manner, click the up and down buttons on the far right to verify that the Z-axis moves normally. If there is no problem with all these tests, it means that your engraving machine can work normally. Shut down the machine using the reverse start process.
6. Close the control panel.
7. Unplug the 24V DC power from the power supply.
8. Close the software program and turn off the computer. Remember, if you run the machine offline, the USB cable must be disconnected for the control board.

The package includes the following parts: 1 × Power Supply 24V, 1 × GRBL1.1 Control Board + USB Wire, 1 × U Disk (2G) + English Manual, 10 × Engraving Bit Kit (3.175mm/20°/0.1mm), 4 × Clamp + 1 × Brush + 1 × Rolled Strips, 1 × Emergency Stop (80mm), 3 × Limit Switch, 1 × X-axis Limit Fixing Plate, 1 × Y-axis Limit Fixing Plate, 1 × Z-axis Limit Acrylic, 1 × Spindle Motor Wire + 1 × Stepper Motor Wire + Winding Tube, 2 × ER Wrench + 1 × Allen Wrench Set.

The upgraded 3018 PRO package includes the following mechanical parts: 1 × 15×180×300mm Working Desk, 2 × 20×40×290mm Aluminum Pro, 2 × 20×20×360mm Aluminum Profile, 4 × Guide Rail (2pcs Z-axis-φ10×360mm; 2pcs Y-axis-φ10×360mm), 2 × Lead Screw (X-Axis-365mm, Y-Axis-295mm), 4 × Bakelite Resin Plate (A+B+C+D), 3 × Stepper Motor (42×34mm), 1 × X-Z Axis Assembly + 775 Spindle Motor (100W), 4 × Slider, 1 × Nut Seat, and various screws.

The updated 3018 PRO CNC Router Machine features: 1. Added X/Y/Z-axis limit switch function, which means the engraving machine can automatically stop moving when the axis moves beyond the engraving stroke, extending the machine's lifespan. 2. Increased the function of the emergency stop button, allowing users to stop engraving immediately in unexpected situations.

The machine supports engraving materials such as wood, acrylic, PCB, PVB, and soft metals. It uses the GRBL 1.1 Controller Board, which connects via USB, operates on 12-24VDC (recommended 24VDC), and supports Windows XP/7/10 (32/64-bit) control software. The work area is 300x180x45 mm, and the frame size is 420x350x270 mm, made of PA6 Nylon and aluminum profile.

product information: